19
PROGRAMMING BY INSERTING THE APPLIANCE CODE
N.B. this operation cannot be interrupted and the remote control cannot therefore be used
until the end of the 4 series of flashes.
CURRENT CODE DISPLAY
To find out the code of your remote control, follow this procedure:
If, when consulting the on-line guide at www.meliconi.com/guide, you find the exact code for the appliance
to program the remote control, insert the code as follows:
HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD
Find them on your
DIGITAL 2 SMART
remote control by pressing the keys one by one and discovering the
commands that interest you.
In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and BRIGHTNESS,
can be found on the following keys:
Although not indicated on the keypad,
some keys can be used for additional commands.
For the functions used less frequently, look for the additional commands on the site
www.meliconi.com/guide. As well as easily finding the code to programme your remote control,
consult the on-line guide to help you to find which keys on the
DIGITAL 2 SMART
.remote control
correspond to the additional commands.
Normalization:
Brightness (+): or green
Brightness (-): or red
Colour (+): or blue
Colour (-): or yellow
1. Hold down the selection key for the appliance to be
programmed for 5 seconds.
2. When the key is released, it will start to flash. Insert the
code within 15 seconds (
e.g.: TV 1100
). Three flashes
indicate that the operation has been completed correctly.
1. Press the select key for which you want to know the code
and hold down for 5 seconds.
2. When the key is released it will start to flash; press and
release the 1-/- key within 8 seconds.
3. After a pause of several seconds, the indicator light
produces four series of flashes with a space between
them, corresponding to the code you are looking for. Count
the number of flashes; each series of flashes corresponds
to one figure in the code. 10 flashes correspond to 0.
4. Make a note of the code on the adhesive label inside the
battery cover for quick and easy future reprogramming.
...................................................... = 1
.......................................... = 3
= 0
....................... = 6
Code obtained = 1306
5 SEC.
or
5 SEC.
or
(5 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales